BTNZP - 11-382 39-800000-975
- MSDS: BTNZP
- Manufacturer: SYON CORP
- Product Name: 11-382 39-800000-975
- National Stock Number: 6850-00F034630
Product Identification
Product ID:11-382 39-800000-975
MSDS Date:01/01/1990
FSC:6850
NIIN:00F034630
Kit Part:Y
MSDS Number: BTNZP
Responsible Party
ASHLAND, MA 01721
US
Emergency Phone: 508-881-8852
Info Phone: 508-881-8852
Cage: 0SJM5
Contractor
Telephone: 508-881-8852
Cage: 0SJM5
Ingredients
NON-HAZARDOUS FOR INGREDIENTS
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT): 2500 MG/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN:
ALLERGIC-SENSITIZATION DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: ALLERGIC-SENSITIZATION
DERMATITIS.
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINUTES. SKIN: WASH W/SOAP &
WATER. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
Fire Fighting
Flash Point Method:COC
Flash Point:315F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:USE SCBA
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE CLOTHING &
RESPIRATOR. SCOOP UP EXCESS & REMOVE. RESIDUAL CAN BE REMOVED
W/NONFLAMMABLE SOLVENT.
Handling
Handling and Storage Precautions:AVOID STORAGE AT ELEVATED TEMPERATURES
OVER LONG PERIODS OF TIME.
Exposure Controls
Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR RESPIRATOR
Ventilation:LOCAL & MECHANICAL EXHAUST
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:SAFETY SHOWER, EYE WASH FACILITIES
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.14
Solubility in Water:SLIGHT
Appearance and Odor:AMBER LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:ELEVATED TEMPERATURES OVER LONG PERIODS OF
TIME
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN, OXIDES OF
SULFUR
Conditions to Avoid Polymerization:EXCESSIVE EXOTHERMS WHEN CURED
Disposal
Waste Disposal Methods:INCINERATE IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.